“Pristine solved our water treatment and recycling needs on short notice and I’ll be calling them when I add a treatment system for our water jet. Pristine’s staff is professional and met all of our requirements and expectations. Once again, thank you.”

Steve Hamrick, Cadillac Stone Works

Cadillac Stone Works – Cadillac Stone Works is a Las Vegas stone fabricator that needed to recycle a large quantity of water to a high degree of clarity. We installed a 45 cubic foot filter press to provide crystal clear water to their CNC equipment.


“I own a granite and marble countertop fabrication firm in Texas. We fabricate and install a large number of countertops each week and we utilize a lot of water in the process of cutting and polishing stone.

I contacted Pristine about purchasing a system to clean up my water and reuse it in our facility. I had an older system that took some of the sludge out but didn’t provide the clean water I needed for more CNC and polishing work. When I spoke to other water firms they wanted me to throw that equipment away and start over with new equipment. Pristine looked at what I had and said that it could be easily incorporated into a new system with a filter press which would save me thousands of dollars over other bids and actually help my new equipment operate more efficiently.

Everything is working really well. My old equipment is part of the process and my new equipment that we added from Pristine is providing me with crystal clear water where I need it. The staff was easy to work with and cared about my operation. When we have had a question they were fast to respond and took care of us.

We have been happy with the equipment and service that we have received from Pristine and would recommend them to others.”

John Ivy, J & H Granite
Hutto, Texas

Challenge: J & H granite needed higher quality recycled water for use on their CNC and polishing equipment. Their current water equipment did not clean the water enough to feed to anything but saws.

Solution: Pristine offered a system that utilized their existing water system along with a new filter press to provide very clean recycled water back to the CNC and polishing equipment. The new system minimizes downtime and cleaning of the filter press.


  • Reused Existing equipment in the solution to minimize project costs.
  • Provided very clear water for CNC and Polish equipment so the customer was able to reuse all of their water and reduce their monthly water bill.
  • Through the combination of equipment filter press cleanings were minimized saving the client time cleaning the press.


“I wanted to take this opportunity to thank you and the Full Circle Water (FCW) team for the activity completed to date for a VHP, Inc. client. We were impressed with your ability to work with us to develop a new design oil/water/solids separation and bacteria destruction process utilizing your in house plate-in-frame (filter press) solids recovery design. The first mobile unit shipped to the field has completed testing/commissioning on some very difficult to process waste water from another client’s process. The design and accompanying process controls have met and exceeded expectations. TSS and color body reduction has been exceptional after you helped us sort out best filter cloth and precoat options. Mechanical operations have met and exceeded expectations aided by your I/O design and the instrumentation and control system provided by one of your vendors; giving us the ability to generate the mass balance data required for evaluating operating performance.

VHP looked at various filter press vendors prior to selection of your company. We selected FCW for your capability to cost effectively integrate your filter presses into the upstream fabricated components required in our design. Your ability to work with us to meet our process design needs was unique and relatively seamless resulting in the fabrication of a product that meets our needs. We are looking forward to working with you as our business expands in our target markets using your services and capabilities.”

Best Regards,
Ron Hypes, Engineering Mgr.
VHP (Vemich, Hype and Paraskos), Inc.
Houston, Texas


“Full Circle Water listened to our needs. Other vendors wanted to sell us equipment….Full Circle Water provides solutions. Customization was very valuable in our application, something other vendors did not offer us.If you are looking for a solution to your slurry treatment needs, go with Full Circle Water! Our concrete slurry processing went from four sources of waste to one waste source and we gained 700 square feet of space!”

Kevin Kangas, Manufacturing Engineer – Concrete
Landscape Structures
Delano, MN


“I would recommend Full Circle Water to anybody.”

-Brad Norris, EnvyR Surfaces

“I worked with Joe for about a year, and he helped me design a system that runs all day long every day without any problems, and removes a majority of solids out of my water.”

-John Sitch, Floorazzo

“You guys were great to work with. I had a lot of issues getting my building ready and your guys were flexible and bent over backwards to help me, and the system runs great.”

-Alex Spagnolo, Sendona Marble & Granite

“I would definitely recommend Full Circle Water for anybody that is interested in your products or services. The installers came to work early, stayed late, and made sure all of our questions were answered.”

-Larry Wild, Yochum Inc.

“The Mud hen is a very valuable asset to our business.”

-Chris Williams, Cardinal Concrete Coatings

“The Mud Hen is extremely durable and dependable. If I do have any questions they respond immediately.”

-Javier Lopez, A Cut Above Concrete Polishing

For more information
on our products, give
us a call today.


St. Joseph, MN & Las Vegas NV

Two U.S. Locations to better serve your needs.