Cadillac Stone Works

“Pristine solved our water treatment and recycling needs on short notice and I’ll be calling them when I add a treatment system for our water jet.”

Pristine’s staff is professional and met all of our requirements and expectations.
Once again thank you.”

Sincerely,
Steve Hamrick
General Manager
Cadillac Stone Works – Cadillac Stone Works is a Las Vegas stone fabricator that needed to recycle a large quantity of water to a high degree of clarity. We installed a 45 cubic foot filter press to provide crystal clear water to their CNC equipment.
See what they had to say.

………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

J & H Granite
June 1st, 2009

I own a granite and marble countertop fabrication firm in Texas. We fabricate and install a large number of countertops each week and we utilize a lot of water in the process of cutting and polishing stone.

I contacted Pristine about purchasing a system to clean up my water and reuse it in our facility. I had an older system that took some of the sludge out but didn’t provide the clean water I needed for more CNC and polishing work. When I spoke to other water firms they wanted me to throw that equipment away and start over with new equipment. Pristine looked at what I had and said that it could be easily incorporated into a new system with a filter press which would save me thousands of dollars over other bids and actually help my new equipment operate more efficiently.

Everything is working really well. My old equipment is part of the process and my new equipment that we added from Pristine is providing me with crystal clear water where I need it. The staff was easy to work with and cared about my operation. When we have had a question they were fast to respond and took care of us.

We have been happy with the equipment and service that we have received from Pristine and would recommend them to others.

Thanks,
John Ivy

Challenge – J & H granite needed higher quality recycled water for use on their CNC and polishing equipment. Their current water equipment did not clean the water enough to feed to anything but saws.
Solution -Pristine offered a system that utilized their existing water system along with a new filter press to provide very clean recycled water back to the CNC and polishing equipment. The new system minimizes downtime and cleaning of the filter press.
Benefits -Reused Existing equipment in the solution to minimize project costs.
-Provided very clear water for CNC and Polish equipment so the customer was able to reuse all of their water and reduce their monthly water bill.
-Through the combination of equipment filter press cleanings were minimized saving the client time cleaning the press.

Leave a Reply

Your email address will not be published. Required fields are marked *